SIG SAUER P250 - Manual (Page 45)

when it counts ™
www.sigsauer.com 45
9.2 magazine catch Removal and Reversal
1. depress the magazine catch until the back protrudes slightly from the opposite side and hold.
2. on the protruding side, press the straightened end of a paper clip into the hole on the back
side of the magazine catch to release the magazine catch stop.
3. remove the magazine catch stop.
4. remove the magazine catch and magazine catch spring, keeping the two pieces together.
5. insert the magazine catch and magazine catch spring on the desired side of the pistol body.
6. insert the magazine catch stop from the opposite side until the magazine catch stop latch
engages.
Step 2
Steps 3 & 4
Steps 5 & 6