SIG SAUER P250 - Manual (Page 21)

when it counts ™
www.sigsauer.com 21
3. insert a loaded magazine, making sure it is engaged.
4. release the slide by:
a. Pressing down on the slide catch lever or,
b. Pulling back on the slide and release
waRning – loaded Pistol
THe PiSTol iS noW loaded and ready To fire.
always make sure the muzzle is pointed in a safe direction! never attempt to load or unload
any firearm inside a vehicle,building, or other confined space (except a properly constructed
shooting range). enclosed areas frequently offer no completely safe direction to point the
firearm; if an accidental discharge occurs, there is great risk of bodily injury or property
damage. Before loading, always clean all grease and oil from the bore and chamber, and
check to be certain that no obstruction is in the barrel. any foreign matter in the barrel could
result in a bulged or burst barrel or other damage to the firearm, and could cause serious
injury to the shooter or to others.
Step 3 Step 4