SIG SAUER P250 - Manual (Page 33)

when it counts ™
www.sigsauer.com 33
8.1 Pistol disassembly
1. unload the pistol (see section 6.0 “unloading the Pistol”).
2. retract the slide to the stop and lock open by engaging the slide catch lever.
3. Verify visually and physically that there is no round in the chamber.
4. rotate the takedown lever clockwise until the takedown lever can no longer rotate (due to
engaging the stop that is incorporated into the frame).
5. retract the slide slightly to disengage the slide catch lever. allow the slide to move forward
in a controlled fashion.
waRning
Slide is under spring tension. Maintain positive control during slide removal to prevent
damage or injury. Wear eye protection.
6. Move the complete slide assembly (slide, barrel, recoil spring and guide) forward and off
the frame.
Step 2
Step 4
Step 5
Step 6