SIG SAUER P250 - Manual (Page 35)

when it counts ™
www.sigsauer.com 35
8.2 magazine disassembly
1. locate the bottom of the magazine floorplate.
2. using a punch, cleaning rod, or similar tool, depress the magazine insert and push the
magazine floorplate forward until it is clear of the magazine tube.
waRning
The magazine spring is compressed. guard the magazine insert and magazine spring with
your thumb to control the release of magazine spring tension. uncontrolled release can cause
injury. Wear eye protection.
3. remove the magazine follower and magazine spring from the magazine tube. This level of
disassembly is sufficient to allow a thorough cleaning after shooting.
Step 1 Step 2 Step 3