SIG SAUER P250 - Manual (Page 39)

when it counts ™
www.sigsauer.com 39
8.5 magazine assembly
1. orient the magazine follower on the magazine spring and insert into the bottom of the
magazine tube.
waRning
The magazine spring is being compressed during assembly. guard the magazine insert and
magazine spring with your thumb to control magazine spring tension. uncontrolled release
can cause injury. Wear eye protection.
2. insert the magazine spring fully into the magazine tube until the magazine insert is flush
with the magazine tube bottom.
3. Holding the magazine insert in place, slide the magazine floorplate onto the magazine tube
lips until the magazine floorplate is locked in place by the magazine insert.
Step 2 Step 3