SIG SAUER P250 - Manual (Page 44)

44 www.sigsauer.com
9.0 Pistol adjustments
9.1 general information
The P250 pistol is designed for both right-hand and left-hand operation and a variety of hand
sizes. The slide catch lever can be operated from either side. The magazine catch may be
repositioned to either side based on shooter preference. The grip module may be replaced by
the shooter, providing a range of ergonomically correct grip configurations.
waRning – unloading
Verify the magazine is removed
and visually and physically
confirm the pistol and chamber
are unloaded before attempting
disassembly or performing any
maintenance steps. failure to
ensure the firearm is unloaded
could result in unintentional
discharge, causing injury or
death.
VeRify the fiReaRm is unloaded