PRG Best Boy Field Service Manual - Manual (Page 33)

BEST BOY 4000 ® SPOT LUMINAIRE FIELD SERVICE MANUAL 25
Removing Aft Cover
To access some interior components, the Aft Cover may need to be removed.
Tools & Supplies:
#2 Philips screwdriver
Loctite #246 (06.6019.0001.01)
WARNING: Remove power from luminaire before performing any maintenance procedures.
To remove Aft Cover:
Step 1. Remove power from luminaire and allow it to cool for at least 5 minutes.
Step 2. At Aft Cover, remove X, Y, and Z adjustment knobs.
Step 3. Remove four 8-32 x 1/2" PFB screws.
Step 4. Carefully remove Aft Cover.
Step 5. Replace Aft Cover by doing steps in reverse. Apply Loctite 246 to threads of screws.
Figure 3-3: Removing Aft Cover
Y
Z
X
X Knob
Y Knob
Z Knob
8-32 x 1/2" PFB Screw (4)
Aft Cover
- Apply Loctite 246