Vertical Communications EP100 - Manual (Page 76)

Programming
78 Comdial
Sept ‘04
6. Respond to any menu prompts
associated with feature (see
example for Pickup).
7. Press programmable button for
storage location.
8. Repeat steps 3 through 7 for other
features, or select EXIT to end
programming.
To clear a feature button assignment, repeat the above procedure, but
select CLEAR before selecting the storage location button.
6.5 Reminder Alert
You can set up to two reminder alerts to sound at your EP100 so that
you will remember important regular events or occasional events.
To set a reminder alert at your telephone,
1. Select OPTIONS.
2. Select NEXT until the ALERT
option appears.
3. Select ALERT.
4. Select 1 OR 2 to select available
alert designation; if you have
already programmed an alert for
1, select 2 to set a second alert
condition.
5. Select ON (select OFF to turn off an alert that has already been
set).
Pickup
GRP DIRECT EXIT
Responding to Prompts to
Program a Pickup Button
Alert 1 10:30 AM
ON OFF< EXIT
Setting an Alert