Vertical Communications EP100 - Manual (Page 22)

Overview
24 Comdial
Sept ‘04
1.4 Setting a Personal Ringing Tone
You can choose one of many different ring tones for your telephone.
Often, when several telephones are located close together, each user
chooses a different personal ring tone.
To select one of the ring tones, proceed as follows:
1. Select OPTIONS.
2. Select NEXT until the RING
option appears.
3. Select RING.
4. Select UP or DOWN to choose
ring tone in display (a new tone
sounds each time you press the
button).
5. Press SPEAKER to end.
1.5 Setting Volume Levels
The volume control on your telephone is a multipurpose control you
can use to set the volume (loudness) of the ringer, the speaker, and the
handset.
To set the ringer loudness level, while your telephone is on-hook and
idle, press the VOLUME Up or VOLUME Down button once for
each change in loudness you desire. The ringer sounds once for each
change as an example of the current setting.
Note: If you set the ringer to the OFF position, your telephone sounds
a short ring burst once for each call you receive at your station.
To set the speaker and handset loudness levels,
1. Press INTERCOM button.
2. Press the VOLUME Up or VOLUME Down button once for
each change in speaker volume that you desire.
Selecting the Ring Tone