Vertical Communications EP100 - Manual (Page 38)

Making Calls
40 Comdial
Sept ‘04
3.2 Making Intercom Calls
There are two methods for making an intercom call. One causes the
called telephone to ring (tone-first). The other causes your voice to
sound out at the called telephone (voice-first). Your installer can set
the system to deliver either tone-first or voice-first calling.
Note: The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To manually cause the other telephone
to ring (tone calling),
1. Press INTERCOM.
2. Dial extension number (called
telephone will ring).
To tone call automatically, press DSS/
BLF button (called telephone will ring).
Note: The following instructions assume a voice-first default setting.
Any user can change a call to a tone signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To voice announce manually,
1. Press INTERCOM.
2. Dial extension number.
3. Speak your announcement.
To voice announce automatically,
1. Press DSS/BLF button.
2. Speak your announcement.
Ext 321 J Doe
Press Intercom to Display
Extension Number
Calling J Smith
CALLBK MSG
Ringing Intercom