Vertical Communications EP100 - Manual (Page 55)

CONVERSip EP100 User
Sept ‘04
Comdial 57
To answer a park recall, select ANS.
The call then connects to your station.
To place a park recall on hold at your
station, select HOLD. After the call
remains on hold for a period of time, it
rings back to your telephone as a hold
recall.
To re-park a park recall and restart the
park timer,
1. ANSWER/RETRIEVE call.
2. Select PARK (the system places the call back in its original
park orbit where it remains until it is answered or recalls
again).
Recall Li
HOLD ANS
A Park Recall
Caller
Your
Station
Other
Stations
Parking
Orbit
To Place Call
In a Parking Orbit...
To Retrieve a
Parked Call From
Any Other Station...
If the Parked Call
Is Not Answered
Within a Set Time,
It Recalls To Your
Station
...DIAL and
Orbit Number
(910-999)
✳
...DIAL # and
Orbit Number
(910-999)
Parking Calls