Vertical Communications EP100 - Manual (Page 29)

CONVERSip EP100 User
Sept ‘04
Comdial 31
2.3 Night-Transferred Calls - Line
Access From Any Station
The system attendant can transfer incoming calls to a particular
station or stations for off-hour ringing.
If your telephone rings,
1. Press line button with flashing light.
2. Lift handset to talk.
When you hear loud ringing anywhere in the system,
1. Lift handset.
2. Press INTERCOM.
3. Choose ringing zone:
• Dial 65 through 68 to select ringing zone (1-4).
• Dial 69 to answer for any zone.
2.4 Holding Calls
You can place a call on hold and retrieve it later. With a regular hold,
you can pick up the held call at your telephone or another user can
pick the call up at a telephone sharing the held call line appearance.
To place a call on hold, press HOLD (station button) or select HOLD
(soft key). The light above your HOLD button begins to blink.
To retrieve a held call,
1. Press line button of the held call (with winking green light), or
press TAP.
2. Speak toward telephone or lift handset if privacy is desired.
With an exclusive hold condition, you must pick up the held call at
your telephone; no other telephone has access to the call.
To place a call on exclusive hold, press HOLD twice.