Vertical Communications EP100 - Manual (Page 27)

CONVERSip EP100 User
Sept ‘04
Comdial 29
2. ANSWERING CALLS
2.1 Answering Outside Calls
When an outside call rings at your station, the LCD screen displays
the system line number of the incoming call (e.g., L123) and any
caller ID information that your station is programmed to receive. In
addition to simply lifting the handset, your other options for
answering the call are displayed above the soft keys.
When you hear outside ringing (two long bursts) and observe an
orange flashing light,
1. For speakerphone, press flashing
line button or select ANS and
speak toward telephone.
2. For privacy, LIFT handset.
3. Select DND if you do not wish to
answer the call at this time.
When you hear outside ringing (two
long bursts) and observe a red flashing
light,
1. Press flashing line button or select ANS.
2. Speak toward telephone or lift handset if privacy is desired.
3. Select DND if you do not wish to answer the call at this time.
Note: For more information on setting DND at your station, see
Section 7.3, Do Not Disturb Condition.
L123 J Doe
DND ANS
Outside Call on Line 123