Vertical Communications EP100 - Manual (Page 65)

CONVERSip EP100 User
Sept ‘04
Comdial 67
5.2 Message Waiting Light and
Messaging
If the system installer designates your EP100 to have message-wait
originate ability, you can turn on the message-waiting light of any
other telephone.
To turn on the message-waiting light (and a broken dial tone, if
installer programmed) at another station that is idle or busy,
1. Press INTERCOM.
2. Dial *3.
3. Dial extension number or press DSS/BLF button of station to
be alerted. The message-waiting light of called station flashes.
You can also turn on the message-
waiting light and broken dial tone at
another station when that station is busy,
1. Hear the busy tone and remain on
the line.
2. Select MSG.
3. Hang up.
To turn off the message waiting light at a busy or idle station,
1. Press INTERCOM.
2. Dial #3.
27
28
29
30
LCD MESSAGE LIST
(Write the attendant supplied messages here.)
Dial Code Message
Calling J Smith
CALLBK MSG
Leaving a LCD Message