Vertical Communications EP100 - Manual (Page 52)

Advanced Call Handling
54 Comdial
Sept ‘04
1. Hear ringing and/or see flashing line status light.
2. Press programmed CALL FORWARD button (system immedi-
ately forwards ringing call to station you designated). See Sec-
tion A, Feature Access Codes for programming instructions.
4.4 Call Forward Outside System
(CFOS)
If enabled by your installer, the Call Forward Outside System
(CFOS)* feature allows you to forward incoming or transferred line
calls to telephone numbers outside the system.
To activate CFOS with your EP100,
1. Select OPTIONS.
2. Select NEXT until CFWD
appears.
3. Select CFWD.
4. Select SET.
5. Select NEXT until CFOS
appears.
6. Select CFOS.
7. Choose a type of CFOS and
select the desired soft key (to
switch the type of CFOS you
wish to select, press TGL):
• Select Itcm for intercom calls
• Select Line for prime line calls
• Select Itcm/Ln for all calls
• Select RNA Itcm for ring-no-answer intercom calls
• Select RNA Line for ring-no-answer prime line calls
• Select RNA Itcm/Ln for all ring-no answer calls.
Call Forwarding
NoANS CFOS NEXT
Selecting CFOS
No CFOS Number
SAVE BKSP NEXT
Set Forward Destination