Vertical Communications EP100 - Manual (Page 43)

CONVERSip EP100 User
Sept ‘04
Comdial 45
3.6.2 CAMPING ON - BUSY STATION, WAIT FOR AN
ANSWER (CALL WAITING)
If the telephone you have called is busy, you can send a call-waiting
tone to the telephone and wait on the line for an answer (you must be
using the handset for this feature to work).
To activate call waiting when you hear a busy signal,
1. Dial *6 (called party hears tone).
2. Wait on line for a reply.
3. The called party can place the current call on hold, disconnect
from the call to answer your call-waiting tone, or choose to
ignore your call-waiting tone and continue the current conver-
sation.
To cancel call waiting,
1. Press INTERCOM and dial #6.
2. Hang up or press SPEAKER to end.
To answer a call-waiting tone if you receive one while on a call,
1. Hear short tone burst in receiver.
2. Place current call on hold, OR complete call and hang up
(waiting call rings at your telephone).