Canon ImageCLASS D680 User Manual
Page 43
4-6
■ Using the platen glass
• You need to remove documents from the ADF in advance, in order to fax from the platen glass.
• You can operate Book Sending, Delete or Clear when the Function key is lit. If the Function key
is not lit, press it. However, you do not need to press Function in step 3 to execute the Book Sending
function if BOOK SENDING is programmed in PROGRAM 1-TOUCH KEY. (
→ p. 9-4)
NOTE
1
Press FAX to set to Fax Mode.
Ex:
2
Prepare the document and place it face
down on the platen glass. (
→ Reference
Guide)
• To adjust the resolution,
→ p. 4-1.
• To adjust the contrast,
→ p. 9-4.
3
Press Function.
4
Press Book Sending.
5
Press 4 (–) or e (+) to select the
document size.
Ex:
6
Press Set.
7
Dial the other party’s fax number.
Ex:
• For dialing methods,
→ p. 4-2.
• If you enter the wrong number, press Delete to
delete the last number or press Clear to delete all
the numbers you entered, then enter the correct
number. You can also delete all the numbers by
pressing Stop/Reset.
• If you must first dial a digit to get an outside line
(“9”, for example), add a pause after that digit by
pressing Redial/Pause.
8
Press Start to begin scanning.
9
Set the next document on the platen glass
and press Start to begin scanning.
• Repeat for other documents.
10
After all the documents have been scanned,
press Set to begin sending.
• To cancel sending after dialing has started, press
Stop/Reset then press 4 (–). (
→ p. 4-7)
• You can scan up to approximately 255
pages* for memory sending.
* Based on ITU-T No.1 Chart, standard
mode.
• The Function key will light up by
pressing Function to be able to operate
Delete or Clear.
• If the machine’s memory becomes full
while scanning your document, MEMORY
FULL
will appear in the LCD and the
document being scanned stops in the ADF.
Press Set to make the document come out
automatically. If this happens, divide the
documents into several sections and send
each section separately.
NOTE
N E X T
P A G E
: [ S T A R T ]
F I N I S H
S C A N
: [ S E T ]
T E L =
9 0 5 7 9 5 1 1 1 1
B O O K
T X
S C A N
S I Z E
L T R
F A X
1 2 / 0 3 / 2 0 0 1
1 5 : 3 0
F a x T e l
S T A N D A R D