Aairvxs dniiiao, Speaker hookup instructions, Speaker positioning instructions – Philips MX920AHT-37 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Speaker Hookup Instructions
Connect the Speakers to the Home Theatre Receiver:
Wth the two Black and Gray color speaker wire, connect the Surround Speakers to the Home Theatre
I
Receiver’s “SURROUND SPEAKER” terminals.
Using the Black and Red color speaker wire, connect the Front Left and Right Speakers to the Home
Theatre Receiver’s “FRONT SPEAKER” terminals.
Using the Black and Blue color speaker wire, connect the Center Speaker to the Home Theatre
Receiver’s “CENTER SPEAKER” terminals.
Using the Black and Green color speaker wire, connect the Subwoofer Speakers to the Home Theatre
Receiver’s “SUBWOOFER” terminals.
NOTE: Be sure the (+) and (-) speaker wires are connected to the correct R(ight) and L(eft) Speaker terminals on
the Home Theatre Receiver.
Speaker Positioning Instructions
Place the Front Left Speaker to the left of the
Television as seen from the front of the Television.
Place the Front Right Speaker to the right of the
Television as seen from the front of the Television.
Place the Center Speaker on top, below, or at the
front of the Television.
Place the Surround Speakers behind and aimed
toward the viewing area. The viewing area should
be between the Television and the Surround
Speakers.
Place the Subwoofer to the left or right of the
Television as seen from the front of the Television.
<3>
<|>
RKOKTSPUK» OUTPUT
SURROUND
rsu
OKHR SHAKER OUTPUT
I rROHTSPlAKER OUTPUT
m
UFTTROKT TEltVISlOH RIGHT FRONT
SPUXER
SPUR»
UFT
SPEAKER
Y
SURROUHD SOUND SPEAKEtS
NOTE: If you hear a buzz from the Front Speakers,
move them farther away from the TV.
aaiRvxs DNiiiao