Displaying alarm profile – CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual
Page 85

ADSL IP DSLAM
77
TargetSnrMargin
Target Signal/Noise Margin. (dB)
MinTxRate
The minimum transmitting rate of ATU-C side or
ATU-R side. (Kbps)
MaxTxRate
The maximum transmitting rate of ATU-C side or
ATU-R side. (Kbps)
MaxInterleaveDelay
The value of Interleave Delay for this channel.
(milli-seconds)
Displaying Alarm Profile
Describes how to display all alarm profile or specific alarm profile.
Command: show alarmprof
Argument List:
Parameter Description
all
Show all information.
Alarm profile name
ADSL alarm profile name.
Example: This example shows how to display the default alarm profile.
IPDSLAM # show alarmprof default
ATU-C:
1. Thresh15MinLofs: 0
2. Thresh15MinLoss: 0
3. Thresh15MinLols: 0
4. Thresh15MinLprs: 0
5. Thresh15MinEss: 0
6. InitFailureTrapenable: enable
ATU-R:
1. Thresh15MinLofs: 0
2. Thresh15MinLoss: 0
3. Thresh15MinLprs: 0
4. Thresh15MinEss: 0
Table 4-11 “show alarmprof” Field Definition
Items Description
Thresh15MinLofs
The threshold of the number of “Loss of Frame
Seconds” within 15 minutes performance data
collection period. (seconds)
Thresh15MinLoss
The threshold of the number of “Loss of Signal
Seconds” within 15 minutes performance data
collection period. (seconds)
Thresh15MinLols
The threshold of the number of “Loss of Link
Seconds” within 15 minutes performance data
collection period. (seconds) (Only ATU-C side)
Thresh15MinLprs
The threshold of the number of “Loss of Power
Seconds” within 15 minutes performance data
collection period. (seconds)