System administration with cli – CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 User Manual
Page 63

ADSL IP DSLAM
55
4.
System Administration with CLI
4
Command Line Interface (CLI) is the primary user interface to Administrate the
system. CLI can be accessed either from the CID port or telnet session. All CLI
commands are simple strings designed for the Administrator to manage your
ADSL IP DSLAM easily.
4.1 Command Structure
There are three-level command structure used in the system. All commands
have the following general format:
IPDSLAM#
Action
Identify the specific function to be acted. For example, in the
case of viewing the information of 16
th
port of ADSL IP
DSLAM, you must enter the command “show port16”. “show”
is the
Identifier
Indicate the object of the specific function to be acted. For
example, in the case of viewing the information of 16
th
port,
you must enter the command “show port 16”; “port” is the
Parameter
Usually indicate the destination or configuring values. In
parameter description, <> means the required fields in a
command, whereas [ ] and | are the optional fields in a
command. For example, in the case of viewing the
information of 16
th
port, you must enter the command “show
port 16” to; “16” is the parameters