CTC Store CTS Union IP DSLAM for ADSL IPDSLAM-A8/A16 - Manual (Page 71)

ADSL IP DSLAM
63
IPDSLAM # reset port 8
Yes or No ?
Restart the ADSL IP DSLAM
Describes how to restart the system without turning on/off power.
Command: restart
Example: This example shows how to restart the system.
IPDSLAM # restart
Yes or No ?
System is restarting now. Wait…
Note: Before you restart the system, be sure that you save all the
configurations by entering the command “save” or the system will start with the
previous settings.
Resetting all Configurations to Default Setting
Describes how to reset all configurations to default.
Command: default
Note: The system will return to the original default settings.
Example:
IPDSLAM # default
Danger!! This will affect your whole system.
Yes or No ?
You have restored the default setting to system.
System Upgrade
Describes how to enable or disable download without in-band management
channel (VLAN).
Command: upgrade
Argument List:
Parameter type Description
Enable / disable Enable / disable upgrade mode