Canon H12157 - Manual (Page 269)

Fr
e
q
u
e
nt
ly
As
k
e
d
Q
u
est
io
n
s
Chapter 13 Frequently Asked Questions 13-21
Problems Feeding Paper into the LASER CLASS 2060P
If you are having problems feeding paper into the LASER CLASS 2060P,
check the following table.
If you are using the multi-purpose tray, whenever you correct one of
these problems, be sure to remove the paper from the multi-purpose tray
and reload it. See page 2-40.
The following problems can also cause the paper to jam in the unit. See
page 13-5 for instructions on clearing paper jams.
N
Problem Possible cause Solution
Paper does not feed
through the multi-
purpose tray? The multi-purpose tray may
contain too many sheets. Make sure the multi-
purpose tray is not filled
past the limit. See page 2-40.
Paper may not be inserted
correctly in the multi-
purpose tray. Make sure paper is inserted
all the way into the multi-
purpose tray. See page 2-40.
Printing is skewed? Paper may not be stacked
correctly in the multi-
purpose tray. Make sure the stack of paper
is straight in the multi-
purpose tray.
Make sure there are no gaps
between the stack of paper
and the paper guides.
See page 2-46.
Make sure the paper exit
path is clear.
Several sheets feed
through the multi-
purpose tray at once? Paper may not be loaded in
the multi-purpose tray
correctly. Make sure paper is inserted
correctly in the multi-
purpose tray. See page 2-40.
Sheets of paper may be
sticking together. Make sure the paper is not
sticking together. Be sure to
fan the stack of paper before
placing it in the multi-
purpose tray. See page 2-40.