Canon H12157 - Manual (Page 216)

9-6 Setting Up and Using Polling Chapter 9
Setting Up Polling Sending
This section shows you how to set up your fax to store and hold a
document until it is polled by another fax to send it.
Before You Can Be Polled to Send
Before you set up your polling box, contact the parties who are going to
poll your fax to receive documents and confirm the following points:
❏ If you are using an ITU-T password for the polling box, they must
also know this password. This password setting is optional.
❏ Your TX PASSWORD must match the ITU-T password attached when
the other party calls you. Confirm that the TX PASSWORD on your
fax matches the ITU-T password attached when the other party calls
you.
❏ If the other party’s fax does not support ITU-T subaddress/password
transactions, do not set the password.
Setting Up a Polling Box
Before you can use polling sending, you must create a polling box with
the POLLING BOX of the Menu System. The polling box holds the
document in the memory until the other party prompts (polls) your fax to
send the document.
1. Open One-Touch Speed Dial panel.
2. Press Data Registration.
R E G I S T R A T I O N
1 . D A T A R E G I S T R A T I O N
Data
Registration