Preparing to send a fax -3, Document requirements, Preparing to send a fax – Canon H12157 User Manual
Page 147
S
e
n
d
in
g
F
axes
Chapter 6
Sending Faxes
6-3
Preparing to Send a Fax
Before you can send a fax, you need to load the document into the LASER
CLASS 2060P. For instructions and information about the types of
documents you can fax with the LASER CLASS 2060P, see below.
Document Requirements
The documents you load into the LASER CLASS 2060P must meet these
requirements:
When the document feed lever is set to Automatic Document Feed:
Size:
• Maximum: 8.5
× 14 in. (216 × 355.9 mm)
• Minimum: 5.8
× 4.1 in. (148 × 105 mm)
Quantity:
• Up to 30 letter-size, 30 A4-size, or 20 legal-size pages
(1 page for sizes other than these)
Thickness:
• 0.002–0.005 in. (0.07–0.13 mm)
(For pages thicker than this, load one page at a time)
• All sheets should be of the same thickness.
Weight:
• 13–24 lb (50–90 g/m
2
)
• All sheets should be of the same weight.
When the document feed lever is set to Manual Document Feed:
Size:
• Maximum: 8.5
× approx. 39 in. (216 mm × approx. 1 m)
• Minimum: 3.5
× 1.75 in. (88.9 × 44.5 mm)
Quantity:
• 1 page
Thickness:
• 0.0023–0.0118 in. (0.06–0.3 mm)
Weight:
• 10.6–90 lb (40–340 g/m
2
)