Canon H12157 - Manual (Page 134)

5-22 Speed Dialing Chapter 5
4. Press Start/Copy.
❏ If you do not press the Start/Copy button within five seconds of
entering the coded speed dialing code, the LASER CLASS 2060P
will begin sending automatically. If you do not want the LASER
CLASS 2060P to send automatically, you need to change the
TIME OUT setting. See pages 15-7 and 15-8 for more details.
❏ If an error occurs during sending, the LASER CLASS 2060P will
print an error report. If this happens, try sending the fax again.
See “Faxing Problems” on page 13-29 for details about errors.
You can also use coded speed dialing to send a document to more than
one location at a time. For details, see “Sequential Broadcasting” on
page 6-31.
Start / Copy
N