Oakworks CFLU401 - Manual (Page 20)

17
DIReCTIons FoR Use
BUBBLe LeVeLs
Bubble levels are installed on the handle end of the table to aid the operator to determine the horizontal plane.
anGLe InDICaToR
Standard on CFLU401, CFUR401 and
CFUR301 Tables. Optional on all other
Imaging Tables.
To use angle indicator, simply press “on/off”
button on the left side of the indicator.
NOTE: Do not press “zero” unless table is
in the horizontal position.
CaUTIon
PaTIenT ResTRaInT sTRaP
The Patient Restraint Strap must be used during all procedures to prevent the patient from
falling off the table.
The strap has Velcro® attached to the ends. The Strap is attached as follows:
1. Place the center of the strap around the patient’s waist.
Relocate the strap as necessary for adequate clearance.
2. Take the ends of the strap down around the tabletop.
Pull the strap snug underneath the table and press the two
Velcro® ends together.
3. Check the strap to assure adequate patient restraint prior
to using the Trendelenburg functions.