New England Arbors VA84231 - Manual (Page 5)

S T E P S I X
Move side panels to their final location and adjust the opening
width to 80 in. (203.2 cm.).
Place the pre-assembled arbor top onto the post as illustrated.
Fasten the main carrying beams onto the posts using two screws
per side as illustrated.
Fasten the rafters to the posts using two screws per side as
illustrated.
Connect the Pergola Top to the Posts
1
2
www.newenglandarbors.com
5 The Fair field Grande Arbor
3
3
Note: To glue the post trims in place:
1. Slide the post trim down.
2. Apply a generous amount of
vinyl glue around the post.
3. Slide the post trim back up to
desired location and allow a few
minutes to cure.
80 in.
203.2 cm.
1
2