New England Arbors VA84231 - Manual (Page 2)

S T E P O N E
2
Insert one steel stiffener (with steel block facing up) into
the lower pocket of the beam past the joiner. Push until
steel block hits the internal ribbing.
Slide the beam coupler over the beam. Install the coupler
so that the four holes are facing up. Push firmly until the
coupler bottoms out on the beam.
Slide a second beam coupler over the steel insert and into
the coupler.
Screw the coupler to the vinyl beams and steel using 3”
screws. The bottom and top holes will need to be pre-
drilled using the bit provided.
Repeat for second beam.
The Fair field Grande Arbor
Assemble the Arbor Beams
1
2
3
www.newenglandarbors.com
4
3
4
Pre-drill holes on bottom and top to
accomodate for internal steel stiffener.
5
2
Four holes facing up
1
Predrilled holes facing up
Beam rib
is removed to
accomodate steel
stiffener
Steel block should be facing up
5
Predrilled holes facing up