Mytek Digital Protools HDX DIO Card (ver. 2.0 / Nov 2013) - Manual (Page 4)

Mytek Protools-HDX DIO Card – User's Manual
Introduction Introduction Introduction Introduction
The Mytek Protools-HDX DIO Card is a physical card that
plugs into the back of the Mytek 8X192 ADDA converter.
With this card installed the Mytek 8X192 ADDA can be directly
connected to the HDX or HD Native (Core, Process or Accel in
backward compatibility mode) interface cards of Avid Pro Tools
HD ® systems .
The card may be installed by the user as described further in the
manual. The 8X192ADDA with the card installed will be
recognized by Protools HD® software as an emulated HD I/O
interface (192 I/O in backward compatibility mode).
Before You Begin Before You Begin Before You Begin Before You Begin
Before connecting the DIO-HDX card check if the most current
firmware (version 4.5.8 or later) is installed in the
8X192 converter. To verify the version locate the firmware chip
on the main converter board, or please contact Mytek for
additional assistance.
(If necessary contact Mytek to request appropriate firmware.)
User's Manual ver. 2.0 / Nov 2013 www.mytekdigital.com Page: 4 / 32