Mytek Digital Protools HDX DIO Card (ver. 2.0 / Nov 2013) - Manual (Page 24)

Mytek Protools-HDX DIO Card – User's Manual
8. Open Setup > Hardware Setup and check:
✔
Are 8X192 ADDA Mytek Digital converters properly
detected as HD I/O?
✔
Are signals input and output of each converter
assigned in the Input and Output tab?
✗
If not, turn off the Pro Tools application and
converters and check the connections of clock signals
between converters as well as the connections
between DIO-HDX cards and with computer.
Setup > Hardware Setup
9. If the hardware configuration was changed, open Setup >
Hardware Setup and press Set To Default.
10. Set Clock Source as Internal.
11. Open or create new project with a chosen frequency.
✔
LED indicating operation at the chosen frequency
should be lit on the front panel.
✗
If LED is not lit or another frequency is indicated,
check the connection between DIO-HDX cards and
with the computer.
User's Manual ver. 2.0 / Nov 2013 www.mytekdigital.com Page: 24 / 32