Mytek Digital Protools HDX DIO Card (ver. 2.0 / Nov 2013) - Manual (Page 14)

Mytek Protools-HDX DIO Card – User's Manual
Input Connection Input Connection Input Connection Input Connection
The Protools DIO-HDX card features two connectors: Primary
Port and Expansion Port. Functionality of these connectors is
identical to Pro Tools system. Up to 4
8X192 ADDA Mytek
Digital converters can be daisy chained or mixed with Avid
HD I/O and other brands that emulate an HD I/O.
Output connectors on the back of Ptools-HDX-DIO card.
Protools computer interface card should always be connected to
the Primary Port in the Master device, which operates as a clock
signal source. Then, Expansion Port can be connected with
Primary Port of a different Slave device. Devices are visible in
Setup > Hardware Setup menu of the Pro Tools application.
User's Manual ver. 2.0 / Nov 2013 www.mytekdigital.com Page: 14 / 32