Mytek Digital Protools HDX DIO Card (ver. 2.0 / Nov 2013) - Manual (Page 29)

Mytek Protools-HDX DIO Card – User's Manual
5. Carefully insert new memory chip in the socket. The
chip slot (pin1) should be matching the socket slot ie
must be facing back of the unit. If necessary gently
manually bend pins inward, to match the holes in the
slot.
6. Mount the top cover back.
During installation check
correct chip orientation.
Marks on chip and socket
must be on the same side.
User's Manual ver. 2.0 / Nov 2013 www.mytekdigital.com Page: 29 / 32