MF Digital CD-5908 (Rev: 08/01/02) - Manual (Page 30)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 5000 Series
Operator’s Guide
Document Revision:100102
Page 29
The 5000 Series defaults to the first image (1). For the purposes of this
example, press the “1” key to select this image, followed by the
“START/YES” key. The screen will now read:
WA I T I N G . . .
WR I T I N G L E A D I N . . .
Progress will be displayed on the screen during the operation:
C O P Y I N G 5 5 %
D R I V E : 1
Upon successful completion the screen will now read:
WR I T I N G L E A D - O U T
D R I V E ; 1
I D L E
D R I V E : 1
WA I T I N G . . .
D R I V E : 1
• Press the “STOP/NO” key to stop the job. To continue the job place
blank CDs into the drives and then close the drives. If you press the
“STOP/NO” key you will see the following screen:
J O B S T O P P E D , P R E S S S T A R T
• Press the “START/Yes” key, and you will be returned to the main
operating screen:
S E L E C T C O P Y O R C O M P A R E
Note: If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.