MF Digital CD-5908 (Rev: 08/01/02) - Manual (Page 29)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 5000 Series
Operator’s Guide
Document Revision:100102
Page 28
I D L E
WA I T I N G . . .
• Press the “STOP/NO” key to stop the job. To continue the job place
blank CDs into the drives and then close the drives. If you press the
“STOP/NO” key you will see the following screen:
J O B S T O P P E D , P R E S S S T A R T
• Press the “START/YES” key, and you will be returned to the main
operating screen:
S E L E C T C O P Y O R C O M P A R E
Note: If discs failed to copy properly, the recorder tray drawers stay
closed upon completion. These discs should not be used. To
help you determine the nature of the problem, error messages
can be displayed by pressing the “9” key on the keypad.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
F R O M H D ?
• Press the “START/YES” key. The screen will now read:
S E L E C T I M A G E
V A L I D I M A G E : 1 T O 6