MF Digital CD-5908 (Rev: 08/01/02) - Manual (Page 13)

CD-3706/P
Operator’s Guide
Document Revision: 030501.1 5000 Series
Operator’s Guide
Document Revision:100102
Page 12
System Startup
Before duplicating can begin it is necessary to review a few details.
• Plug one end of the supplied power cord into the upper receptacle at the
rear of the unit.
• Next, verify that the voltage selector switch is set correctly. It is located
between the two power receptacles. The 5000 Series supports both 115
VAC and 230 VAC at 50 ~ 60 Hz. Please confirm that the appropriate
voltage (115 VAC for North America) has been selected.
CAUTION
Always use properly grounded receptacles or severe damage to
your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.