MF Digital SCRIBE 9000 - Manual (Page 44)

Page 43
Speed The recording speed pull-down allows you
to set the recording speed as determined by
the capabilities of the recorders installed in
the Scribe .
Print first
When checked, Scribe will print the disc
before copying. This is require when
printing to BizCDs.
5. You will then enter the quantity of discs
toward the bottom of the screen, then click
the ‘Next’ button.
6. If you choose ‘Print’, you will b prompted to
select a label file (fig. 3). Click on browse
and locate the PRN, STD, or PDF file to be
used (Seethe appendices of this manual for
tips on making these files). Enter the desire
number of copies and optionally select “Print
before copying / verifying” (for use when
using BizCDs
and BizCD adapter) and /
or “Ignore low ink level”.
A note about “Ignore Low Ink Level”
Competitive systems continue to attempt to
print even when cartridges have run out,
resulting in ruined discs. PicoJet equipped
Scribe systems will stop at 4% remaining
ensuring you will not waste discs.
Optionally you can choose to ignore this
safeguard to glean the last few discs out of
a cartridge.
7. When you are satisfied with your selections,
click the ‘Next’ button. The job confirmation
dialog will be displayed (fig 3).
8. Click on the ‘Finish’ button to launch your
job.
(fig. 3)
(fig. 4)