MF Digital SCRIBE 9000 - Manual (Page 43)

Page 42
Copy and / or Verify
This allows you to start copying or verifying from an image file, or a new master disc.
1. Select the “Copy and/or Verify” button as
seen in (fig. 1).
2. Click “Next”.
3. Select the Image source for your job. This
can be an ISC, IMG, UDF or a master disc
that you place on top of the blank discs. The
Scribe will archive (read-in) the contents of
the master and copy the contents to as many
discs as are indicated in the quantity box. If
the Scribe detects another master during the
copy process, the Scribe will reject the
additional master. You may also select
browse and choose an existing disc image.
4. You will then want to choose the Operations
and Options for your job: Copy, Test,
Writing speed, Verify, and Print.
Operations and Options:
Copy When checked, the discs in the submitted
job will be recorded using the disc image
file selected in the IMAGE field.
Verify When checked, the discs in the submitted
job will automatically be compared against
the source files after recording is
completed.
Print When checked, the discs will be printed
with the disc label selected in the LABEL
FILE field.
Test When checked the CDs in the submitted
job will not be recorded.
(fig. 1)
(fig. 2)