Maxim Integrated MAX15303 PMBus Command Set - Manual (Page 51)

MAX15303 PMBus Command Set User’s Guide
Page 51 of 52
ZETA_P
Data Bytes: 2 Units: Scalar
Transfer: Read/Write Byte Factory Value: 0xBB00 (1.5)
Description/Notes: The ZETA_P command sets the damping ratio for the closed-loop response. The value can be changed
to improve performance when using non-ceramic output capacitors with higher equivalent series
resistance.
Wait at least 500μs for execution after sending the ZETA_P command before sending additional
PMBus commands.
Trademarks
InTune is a trademark of Maxim Integrated Products, Inc.
PMBus is a trademark of SMIF, Inc.