Maxim Integrated MAX15303 PMBus Command Set - Manual (Page 28)

MAX15303 PMBus Command Set User’s Guide
Page 28 of 52
STATUS_INPUT
Reference: Standard Command Lockable: N/A
Command Code: 0x7C Format: Bit field
Data Bytes: 1 Units: N/A
Transfer: Read Byte Factory Value: N/A
Description/Notes: See Section 17.5 of the PMBus Specification Part II.
Bits #6, #5, #2, #1, and #0 are not implemented in the MAX15303 because the corresponding fault
commands are not supported.
STATUS_TEMPERATURE
Reference: Standard Command Lockable: N/A
Command Code: 0x7D Format: Bit field
Data Bytes: 1 Units: N/A
Transfer: Read Byte Factory Value: N/A
Description/Notes: See Section 17.6 of the PMBus Specification Part II.
Bits #5 and #4 are not implemented in the MAX15303 because the corresponding fault commands
are not supported.
STATUS_CML
Reference: Standard Command Lockable: N/A
Command Code: 0x7E Format: Bit field
Data Bytes: 1 Units: N/A
Transfer: Read Byte Factory Value: N/A
Description/Notes: See Section 17.7 of the PMBus Specification Part II.