Malone MPG171 - Manual (Page 6)

Installation with Cross Bars
MALONE
R
Installation & Loading Instructions - MPG171 Deluxe SUP Kit
16
. Pull the free end of a Load Strap down until the
the buckle is positioned approximately 6” above
the cross bar.
Insert the Strap free end up and through the buckle.
Pull down to tighten. Repeat for second Strap.
Confirm the boards are secure and the Straps are
firm before transport. See Image 16.
NOTE: For added security, dress the extra strap
around the cross bar and form a knot.
17
. The free ends of the Straps can now be placed
into the vehicle and the doors shut.
See Image 17.
Always inspect mounting hardware, cross bars and load straps for proper and
secure attachment before and during transport. Use of this product for any
other application other than watersport carrier transport voids warranty.
MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092
Phone: 207-774-9100 Fax: 207-615-0551
Website: www.maloneautoracks.com Email: [email protected]
Warning: All vehicular rooftop transports are potentially hazardous.
Any person using MALONE automotive transport systems is personally
responsible for following the given directions for use and installation
and accepts full and complete responsibility for any and all damages
or injury of any kind including death, which may result from their use.