Mpg171 instructions #2 (no cross bars), Malone – Malone MPG171 User Manual

Page 3

Installation without Cross Bars

MALONE

Installation & Loading Instructions - MPG171 Deluxe SUP Kit

. Always check the Load Straps and SUP boards for

proper and secure attachment before transport.

See Image 9.

Limit travel to 150 miles or less. Check the boards

after the first 5 miles to confirm the transport is

correct and safe.

. With the doors open, pull the free end of each

Load Strap back through the vehicle.

You should now have two continuous Strap loops

dressed over the SUP board(s) and through the

vehicle. See Image 7.

. Insert the free end of each Load Strap up

and through each buckle. Pull the free end

down to tighten. See Image 8.

For best results, tighten both straps at the

same time, going back and forth until both

Straps are firmly tight and the boards are

fully secure.

The free ends of the Straps can now be

dressed into the vehicle and the doors shut.