Mpg171 instructions #3 (cross bars), Malone – Malone MPG171 User Manual

Page 4

Installation with Cross Bars

MALONE

Installation & Loading Instructions - MPG171 Deluxe SUP Kit

. Place the 24” Blocks onto the cross bars with the

bottom cut-outs fully inserted over each bar.

Center the Blocks in the middle of both cross bars.

See Image 10.

NOTE: The cross bars should be spaced a minimum

of 30” apart.

. Place and center the two Spacer Pads onto the

top of the SUP mounted on the blocks.

See Image 12.

If only one SUP is to be transported, go directly

to Instruction 14.

. Place the SUP onto the Blocks so that the

bottom of the board is facing up. Align the

SUP so it’s weight is evenly distributed on

the two Blocks. See Image 11.