Malone MPG154 User Manual
Malone, Standard kayak kit
3
MALONE
R
Installation & Loading Instructions - Please Read Before Beginning
1
Standard Kayak Kit
Standard Kayak Kit
SOFT RACK KAYAK CARRIER
. Place the kayak onto the Blocks so that it
is aligned and the weight of the kayak is
evenly distributed on each Block.
See image 2.
. Unroll the Load Strap. Open the vehicle’s doors.
Throw the non-buckle end of the Strap up and
over the kayak and down to the other side of the
vehicle. Center the Strap in the middle of the
kayak. See image 3.
12’ Bow & Stern Lines
15’ Load Strap
2
Kayak Blocks
MPG154
Step 1: Positioning Blocks & Loading Kayak
. Confirm that the Blocks and roof of the vehicle
are clean and free of dust and dirt. Do not place
Blocks on a sun roof.
For installation without cross bars; center the
Blocks on the vehicle’s roof. Maintain a minimum
of 24” between the Blocks. See image 1.
For installation with cross bars; fit the Blocks
onto the cross bars with the bottom profile of
each block fully inserted over each bar.