Malone MPG110MD - Manual

MALONE
R
SaddleUp PRO SaddleUp PRO
TM
UNIVERSAL KAYAK CARRIERS
Mounting
Bolt
1
2
3
4
Step 1: Installing the Carriers onto the Cross Bars
. Insert a mounting bolt into the right side hex hole. See image 1.
. Insert mounting bolt through one hole of a Jawz adapter and loosely
apply T-knob. See image 2.
. Place the carrier onto the front cross rail with the bottom rounded side
towards the edge of the roof. Swing the Jawz under the cross bar
as shown. See image 3.
. Insert a mounting bolt into the left side hex hole and down through the
Jawz adapter. See image 4.
T-knob
Jawz
Mounting
Bolt
Roof
Edge
12’ Bow & Stern Lines Mounting Bolts
40mm
50mm
12’ Load Straps
MPGMD109-F
Kayak Carrier
MPGMD109-R
Kayak Carrier
For SaddleUp Pro MPG109MD-F, set of 2: Follow instructions 1-6.
For SaddleUp Pro MPG109MD-R, set of 2: Follow instructions 7-11.
For SaddleUp Pro MPG110MD, set of 4: Follow instructions 1-20.
TM
Jawz Adapters TM
Installation & Loading Instructions: Please Read Before Beginning:
TM
TM
TM
TM
TM