Malone MPG171 - Manual (Page 2)

Installation without Cross Bars
MALONE
R
Installation & Loading Instructions - MPG171 Deluxe SUP Kit
4
. Unroll the two green 15’ Load Straps. Open the
vehicle’s doors. Throw the non-buckle ends of each
Strap up and over the SUP(s) and down to the other
side of the vehicle.
The Load Straps and the Blocks should be as closely
aligned as possible. See Image 6.
6
. Confirm that the bottom of the Blocks and the
roof of the vehicle are clean and free of dust
and/or dirt that could scratch the vehicle’s finish.
Place and center the SUP with Blocks onto the
vehicle. See Image 4.
. Place and center the 2nd SUP onto the
Spacer Pads. See Image 5.
If only one SUP is to be transported, go
directly to Instruction 6.
5