Malone MPG331 - Manual

MALONE
R
Installation Instructions - Please Read Before Beginning
Warnings / Limitations: Do not exceed the published load bearing weight of the product.
Use on a flat dry surface. Under no circumstances will the manufacturer be responsible for
damages or failures that occur as a result of improper assembly or usage.
FS Rack Storage System
(MPG318 - MPG331 - MPG332)
FS Rack Storage System
(MPG318 - MPG331 - MPG332)
Lower Upright (2) Frame Leg (2) Cross Support (5) Top Upright (2) Upright Brace (4) Coupling (2)
Assembly Hardware
Bolt, 45mm
I
Bolt, 50mm
J
A B C
D E
F
Leveler (6)
G
H
. Align Lower Upright (C), Frame Leg (A) and Upright
Brace (D) mounting holes. Install and firmly tighten
45mm Bolts (I) and the 50mm Bolts (J). Install and
fully insert Levelers (G). See image 3.
. Repeat Steps 2 and 3 to assemble the second lower
side assembly.
NOTE: If optional Casters or Leg Extensions are to
be installed, see instructions included with product.
Step 1: Vehicle Installation
. Open the carton, remove the contents and confirm
that all the components of the rack have been
included. See image 1.
2
A
E
E
D
D
C
See Image 3
for Bolt
Installation
G
. Identify and pre-stage the following parts for
building a lower side assembly.
See image 2.
1
3
G
I I I I
J
J = 50mm Bolts
I = 45mm Bolts