Malone MPG152 - Manual

MALONE
R
Installation & Loading Instructions - Please Read Before Beginning
1
3
Deluxe Kayak Kit Deluxe Kayak Kit
SOFT RACK KAYAK CARRIER
. Place the kayak onto the Blocks so that it
is aligned and the weight of the kayak is
evenly distributed on each Block.
See image 2.
Step 1: Attaching Blocks to Kayak
. Unroll the 9’ Block Straps. Thread each one
through the cut-out in the bottom of each
Block. For installation without cross bars,
the Blocks should be placed so that they are
spaced apart 1/3 of the total length of the
kayak. For installation with cross bars, the
Blocks should be spaced apart the same
distance as the distance between the front
and rear cross bars. See image 1.
. Tighten the two Block Straps so that kayak
and Blocks are firmly cinched together.
See image 3.
12’ Bow & Stern Lines 15’ Load Straps 9’ Block Straps
2
Kayak Blocks
MPG152