Malone MPG113MD - Manual (Page 5)

. Place the straps parallel to the carriers
with the front strap loop on the windshield
and the rear strap loop on the back of the
vehicle. See image 18.
Step 3: Loading the Kayak
. Route the free end of a 12’ Load Strap down through
the top of the outer most strap slot and back up
through the inside slot of the carrier. Pull the free
end until there is an even loop. Repeat for the second
carrier. See image 17.
. Insert the four Rubber Plugs into the four
top side hex holes in the two carriers.
See image 16.
15
MALONE
R
Installation & Loading Instructions - MPG113MD SS Combo
TM
16
18
. Confirm the carriers are in alignment. Firmly
tighten the T-knobs until both carriers are securely
fixed to the cross bars. See image 15.
17