Malone MPG113MD - Manual (Page 3)

7
MALONE
R
Installation & Loading Instructions - MPG113MD SS Combo
. Insert Bolt through one hole of the Jawz
mounting adapter and loosely apply the
T-knob. See image 8.
Note: Additional bolt lengths available.
. Insert a single 70mm Mounting Bolt down through
the SeaWing and Mounting Plate. See image 7.
. Place the Stinger with SeaWing assembly onto
the rear cross bar of the vehicle with the V-Block
closest to the rear of the vehicle. Swing the Jawz
under the cross bar and insert the second 70mm
Bolt. See image 9.
TM
. Loosely secure the second Bolt with a T-knob.
Position the assembly to the final location.
Finish by firmly tightening the T-knobs. See
image 10.
8
9
10