Malone MPG113MD - Manual (Page 4)

. Insert a second Mounting Bolt into the top side
unused carrier hex hole and down through the
Jawz mounting adapter. Apply a second T-knob
and slightly tighten until the carrier is secure.
See image 14.
11
MALONE
R
Installation & Loading Instructions - MPG113MD SS Combo
TM
12
13
14
. Insert Mounting Bolt through one hole of a
Jawz Mounting Adapter and loosely apply
a T-knob. See image 12.
. Using the second SeaWing carrier, insert a Mounting
Bolt into one of the top side hex holes.
See image 11.
. Place the carrier onto the front cross bar. Swing
the Jawz under the cross bar as shown.
See image 13.